The compact VV100 valve series incorporates two 3 port valves into one station.

Manifold options include direct and bracket type mounting, d-sub or individual wiring and many variations of piping sizes.

Download PDF

• Highly integrated unit 
• Two direct operated 3-port valves are mounted per station.
• Possible to shut the signal to each valve individually
• Available piping variations: Ø2, Ø4, Ø1/8”, Ø5/32” one-touch fittings

The HEC thermo-con gives constant and accurate temperature control through the use of the peltier affect technology.The use of this leading edge technology delivers  a temperature stability of +/- 0.01 to 0.03°C.
 
The HEC is available in both air and water-cooled types, with cooling capacity ranges of 230W to 1200W. Both versions are refrigerant free and are suitable for use with clean water and fluorinated fluids (GALDEN® HT135, Fluorinert™ FC-3283*). The units are both CE and UL certified and compliant with the safety standard for medical equipment IEC 60601-1 (Air-cooled/HEC-A series).

*-Water cooled type

Download PDF

• Controls the temperature of a heat source or process fluid
• Set temperature range 10-60^oC
• Cooling Capacities of 230W, 600W, 1200W
• Compliant with CE, UL(NRTL) standards and safety standards for medical equipment (IEC60601-1)

The new VXE energy saving process valve offers a built in power saving circuit which
reduces power consumption (when holding) by up to 1/3 which also sees a reduction in both
running costs and valve running temperature increase.

The VXE series is dimensionally interchangeable with our VX range of general purpose valves, Therefore are available in port sizes ranging from 1/8” to 1” and coils are replaceable. Both individual body type and manifold mounted options are available

Download PDF

• Energy Saving product
• Mounting dimensions are the same as VX2, VXZ,VXD  
• Standard coils may be replaced with energy saving coil
• Rise in coil temperature has been reduced
• IP65 and RoHS Compliant 
• Applicable fluids: Air, Water and Oil*
  (Note: Please consult with SMC regarding Oil Specification)

The compact and lightweight CQU plate cylinder offers both an overall reduced length of up to 40% and a reduction in mass of up to 36% when compared with a standard compact cylinder.  Maintenance is made easy with the simple removal of the elliptical retaining ring. Autoswitches can be mounted on all 4 sides of the cylinder.

The CQU’s compact design allows a smaller mounting pitch while further options include choice between male and female rod end thread, vertical and lateral foot mounting and double clevis.

Download PDF 

• Light and compact
• Allows for smaller mounting pitch
• Easy maintenance
• Available bore sizes:
  Ø20, Ø25,Ø32, Ø40