;SMC Gateway Unit EX500-GPR1A-X8 HW I/O=64/64
;Name: Smc_140C.gsd
;Version:   1.0
;
;Date:     14.04.03
;
#Profibus_DP
GSD_Revision = 2								;Version ID of the GSD file format
Vendor_Name = "SMC Pneumatic"		;Manufacturer's Name
Model_Name = "EX500-GPR1A-X8"			;Manufacturer's designation of DP device
Revision = "V1.0"           			;Revision version of the DP device
Ident_Number = 0x140C						;Device type of the DP device
Protocol_Ident = 0             		;Protocol ID of the DP device(0:PROFIBUS DP)
Station_Type = 0           			;DP device type(0:DP Slave)
FMS_supp = 0									;Not an FMS/DP mixed device
Hardware_Release = "2"         		;Hardware release of the DP device
Software_Release = "1"					;Software release of the DP device
;
9.6_supp = 1                    	;Supports the baudrate 9.6 kBaud
19.2_supp = 1									;Supports the baudrate 19.2 kBaud
45.45_supp = 1                   	;Supports the baudrate 45.45 kBaud
93.75_supp = 1                   	;Supports the baudrate 93.75 kBaud
187.5_supp = 1                   	;Supports the baudrate 187.5 kBaud
500_supp = 1                    	;Supports the baudrate 500 kBaud
1.5M_supp = 1 									;Supports the baudrate 1.5 MBaud
3M_supp = 1 									;Supports the baudrate 3 MBaud
6M_supp = 1										;Supports the baudrate 6 MBaud
12M_supp = 1                			;Supports the baudrate 12 MBaud
;
;This is time a responder needs as a maximum at a baudrate to respond
;to a request message(refer to EN 50170 Part 8-2 Clause 8.8)
MaxTsdr_9.6 = 15
MaxTsdr_19.2 = 15
MaxTsdr_45.45 = 15
MaxTsdr_93.75 = 15
MaxTsdr_187.5 = 15
MaxTsdr_500 = 15
MaxTsdr_1.5M = 25
MaxTsdr_3M = 50
MaxTsdr_6M = 100
MaxTsdr_12M = 200
;
Redundancy = 0                  	;Supports redundant transmission engineering(0:No)
Repeater_Ctrl_Sig = 0						;The bus connector signal CNTR-P is specified(0:Not connected)
24V_Pins = 0                    	;The bus connector signal M24V and P24V is specified(0:Not connected)
;
Freeze_Mode_supp = 1						;Supports the Freeze mode(1:True)
Sync_Mode_supp = 1							;Supports the Sync mode(1:True)
Auto_Baud_supp = 1							;Supports automatic baudrate recognition(1:True)
Set_Slave_Add_supp = 0      			;Supports the function Set_slave_Add(1:True)
Fail_Safe = 1
User_Prm_Data_len = 5						;The length of User_Prm_data
User_Prm_Data = 0x00,0x00,0x00,0x00,0x00	;Specifies the default value for User_Prm_data
Min_Slave_Intervall = 1					;The minimum interval time(Time Base:100 us)
;
Modular_Station = 0							;0:compact device
Slave_Family = 9								;9:Gateway
Implementation_Type = "SPC3"
Max_Diag_Data_Len = 13					;The maximum length of the diagnostic information
Unit_Diag_Bit(0)	="Comm. Port A :Not connect"
Unit_Diag_Bit(1) ="Comm. Port B :Not connect"
Unit_Diag_bit(2) ="Comm. Port C :Not connect"
Unit_Diag_bit(3) ="Comm. Port D :Not connect"
Unit_Diag_bit(4) ="Sol. Power :Drop(Power < 20V)"
;
Module = "DP-Kompaktgeraet 64A/64E" 0x17,0x27
EndModule